* HSIC Neutrino Ethernet *

This driver implements HSIC based Ethernet driver for Neutrino ethernet controller

Required properties:
  - compatible: Should be "qcom,ntn-hsic"
  - vdd-ntn-hsic-supply: Neutrino HSIC power supply
  - ntn-rst-gpio: Neutrino reset GPIO
  - ntn-phy-id: Neutrino PHY ID
Optional properties:
  - ntn-timestamp-valid-window: Timestamp valid window in ms.
				Each unit represents 16.75ms.
  - ntn-timestamp-valid-window-disable: Disable Timestamp valid window feature.
				if this property not set, then feature disabled
				in driver.

Example:
	qcom,ntn_hsic {
		compatible = "qcom,ntn-hsic";
		vdd-ntn-hsic-supply = <&mdm9607_l11>;
		pinctrl-names = "default";
		pinctrl-0 = <&ntn_rst_gpio_default>;
		ntn-rst-gpio = <&tlmm_pinmux 30 1>;
		ntn-phy-id = <7>;
		ntn-timestamp-valid-window = <4>;
		ntn-timestamp-valid-window-disable = <0>;
	};